Home
Welders
Plasma Cutters
Accessories
 Warranty



XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX


**New feature added, Aluminum stick welding capability.** (Patent Pending)

This newly released Lotos 3 in 1 machine can now stick weld aluminum.

Simply reverse the ground clamp and the stick holder and use our specially manufactured rods.




As one of the largest manufacturers of plasma cutting, tig/stick, arc (MMA) welding equipment in the world, Lotos Welders Canada is proud to offer an extensive selection of industrial plasma cutting and tig/stick welding machines.

The Lotos CT520D is designed and constructed to withstand extensive use in rugged industrial and construction environments.

The Lotos CT520D is a THREE-IN-ONE Digital Inverter Plasma Cutter (50A) / Tig Welder (200A) / Stick (MMA) welder (200A). You would have to purchase 3 separate machines to do what this ONE machine can do!

Using this portable plasma cutter is cheaper than Oxyacetylene after just a few cuts. Less cleaning, less maintenance, less noxious gases, less fire hazard, simply less overall work and a better, cleaner cut. The torch trigger can be moved for a custom fit. It can be used in finger or thumb positions. Torch head has a low profile for tight spaces. High Frequency DC Plasma cuts thicker materials than standard DC plasma cutters. High Frequency Plasma cuts faster and with less distortion in the work piece.

It's packed with all the features found in the separate machines. The Tig welds from the CT520D are clean and strong. The Tig welder is easier to use than any other Tig welder on the planet! Just flip a switch, set your amperage and weld... It's that simple. This machine will weld Steel, Stainless Steel, Moly, Ferrous,

An ARC welder is a necessity in any industrial shop or home workshop. There are welding jobs that simply require ARC or SMAW (Shielded Metal Arc Welding). Stick welding is cheap and effective. Fill large gaps, holes, weld cast iron and weld extra thick steel with stick. With Arc welding, no shielding gas is required. In many ways stick arc welding is like MIG without the wire feed, you do that manually.

Machine Features:

Plasma CuttingTig WeldingArc/Stick/MMA Welding

Accessories Included:

Plasma cutting torch.

Tig Welding Torch with 11 ft hose. (with long and short caps)

Ground cable (9 ft) with clamp.

Initial cutting consumables. (tip, electrode, o-ring and shield cup) Air filter and regulator with accessories and brackets.

Air hose and clamps.

Argon regulator. (U.S. standard argon regulator)

Stick (ARC) Holder.

You are required to supply a 60~70 psi air supply for plasma cutting.

Footpedal is not included but it is available (see accessories page)

Solar powered Auto-darkening welding helmet not included but is available (see accessories page)

Output Current: 15-200 Amps

Power Usage 23 Amps @ 220VAC

No Load Voltage: 62V

Can Weld: Steel, Stainless, Moly, Ferrous

Duty Cycle: 60% @ 200 Amps 100% @ 95 Amps

High Frequency Start / HF Welding

Working Voltage: 25 Volts Output Current: 15-200 Amps

Power Usage 17 Amps @ 220VAC

No Load Voltage: 62V

Can Weld: Steel, Stainless, Moly, Ferrous

Duty Cycle: 60% @ 200 Amps 100% @ 105 Amps

High Frequency Start / HF Welding

Working Voltage: 16.9V

Gas Flow: 2-5L/min (using Argon supply) Duty Cycle: 60% at 50 amps and 100% at 35 amps

Rated Input Current: 27 amps

3" Per minute @ 1" Steel (Severance Cut)

7" Per minute @ 3/4" Thick Steel

17" Per minute @ 1/2" Thick Steel

Air pressure required: 60~70 psi @ 3.6 cfm
Three-in-one

Automatic Dual Voltage (110VAC/220VAC) Dual Frequency (50Hz/60Hz)

High quality FUJI Mosfets (total 12 pieces) from Japan Brand newPAPST

Input Voltage: 110vac ~220vac (Auto detected, no switch is necessary)

Input Power Frequency: 50 hz / 60 hz (Better performance under 60 hz)

Insulation Grade: B

Housing Protection Grade: IP21

Size: 21'' L x 16'' W x 11'' H

Weight: 39 lbs (43 lbs with box)

Certification: CE, CCC, CSA and ISO-9001 certification Power factor: 0.93

Power efficiency: 85%

Cooling system from Germany

Double function tested and performance tuned prior to shipping

1 Year Warranty

PRICE: $689.00 *

   In Stock

All items are shipped from the main warehouse in California.  Buyer is responsible to pay applicable taxes,  brokerage and customs fees. 

XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX


 Foot Pedal Included




Capable of Stick Welding Aluminum (NEW feature for the model released.) Dual Voltage (110/220Vac) with all accessories! 


Make: LOTOS   Year: 2014 
Model: BLCT520D (5th Generation with improved HF board) The cover of the machine is blue. 
Type: 3-in-1 50A Plasma Cutter 200A TIG Welder, 200A STICK Welder                      Condition: BRAND NEW (In Sealed Factory Box)                                                       
Features: 50A plasma cutter. Automatic DUAL Voltage (110VAC/220VAC), DUAL Frequency ( 50Hz/60Hz ) High Quality FUJI Mosfets (Total: 12) from Japan. Brand new yet double function tested and performance tuned prior to shipping. PAPST cooling system from Germany 3 Years Warranty on Parts and Labor from Lotos California or other Authorized Lotos Dealers/Repair Centers. Input Voltage: 110~220 VAC (Auto Detected-NO Switch is necessary) Input Power Frequency: 50 hz / 60 hz (Better performance under 60 hz) Insulation Grade: B Housing Protection Grade: IP21Size: 17'' L x 8'' W x 11'' H Weight: 55 lbs. Certification: CE, CCC, CSA and ISO-9001 certification Power factor: 0.93Power efficiency: 85%

Accessories:

50A Plasma Torch (9' 8")  Larger Tig Welding Torch (with long and short caps) (12' 4")       Initial Plasma Consumables (installed on the torch head)                                                    Air Filter/Regulator with accessories and brackets                                                               Air Hose (7') Argon Regulator (U.S Standard Argon Regulator with CGA580 Connector       Stick (ARC) Holder (9' 8") Ground Clamp & Cable (9') Footpedal User Manual  
Warranty: 3 Years (Parts and Labor)

SPECS:


Plasma Cutting

110/220VAC, 50/60HZ 

Duty Cycle: 60% at 50 amps and 100% at 35 amps

Rated Input Current: 27 amps

3" Per minute @ 1" Steel (Severance Cut)

7" Per minute @ 3/4" Thick Steel

17" Per minute @ 1/2" Thick Steel

Air Pressure Required: 60~70 psi @ 3.6 CFM

 

Tig Welding:

Output Current: 15-200 Amps

Power Usage 17 Amps @ 220VAC

No Load Voltage: 62V

Can Weld: Steel, Stainless, Moly, Ferrous

Duty Cycle: 60% @ 200 Amps 100% @ 105 Amps

High Frequency Start / HF Welding

Working Voltage: 16.9V

Gas Flow: 2-5L/min (using Argon supply)

Footpedal is included in the package!!

 

Arc/Stick/MMA Welding:

Output Current: 15-200 Amps

Power Usage 23 Amps @ 220VAC

No Load Voltage: 62V

Can Weld: Steel, Stainless, Moly, Ferrous

Duty Cycle: 60% @ 200 Amps 100% @ 95 Amps

High Frequency Start / HF Welding

Working Voltage: 25 Volts

New Feature Added: Aluminum Welding for Stick Welding ONLY (patent pending)

 PRICE: $700.00 * 

Out Of Stock

All items are shipped from the main warehouse in California.  Buyer is responsible to pay applicable taxes,  brokerage and customs fees.

XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX






  Make: LOTOS
  Year: 2014 
  Model: LTPDC2000D (5th Generation with improved HF board)

  Type: 3-in-1 IGBT Pilot Arc 50A Plasma Cutter 200A TIG Welder, 200A STICK Welder
  Condition: BRAND NEW (In Sealed Factory Box)
  Status: IN STOCK (Ships in 2 Business Days)
  Features: • 50A plasma cutter.
• Dual Voltage (110/220), DUAL Frequency ( 50Hz/60Hz )
• Robust Infineon (By Siemens) IGBT Power Drive Matrix with PILOT ARC Plasma Cutter
• Brand new yet double function tested and performance tuned prior to shipping
• PAPST cooling system from Germany
• 1 Years Warranty on Parts and Labor from Lotos operated by Zion International Inc or other Authorized Lotos Dealers/Repair Centers.


• Input Voltage: 200~250 VAC
• Input Power Frequency: 50 hz / 60 hz (Better performance under 60 hz)
• Insulation Grade: B
• Housing Protection Grade: IP21
• Size: 15.5'' L x 8'' W x 12'' H
• weight: 43 IB, with ped: 52
• Certification: CE, CCC, CSA and ISO-9001 certification
• Power factor: 0.93
• Power efficiency: 85%

 
  Accessories: • Larger 60A Heavy Duty Plasma cutting torch. with Pilot Arc function and simple guide (not shown on the picture), (you can disconnect one cable to disable pilot arc function for this torch, all CNC users must use Pilot Arc function). (12' 2")
• 3 pieces are pre-installed on cutting torch.
• Tig Welding Torch WP-17 (with long and short caps) (12' 1")
• Air Filter/Regulator with accessories and brackets
• Air Hose (9' 3")
• Argon Regulator (U.S Standard Argon Regulator with CGA580 Connector
• Stick (ARC) Holder (10')
• Ground Clamp & Cable
• 220VAC Power Plug
• User Manual (Click Here)

• Quick Setup Guide (Click Here)

  
 Warranty: 1 Years (Parts and Labor)

SPECS:


Plasma Cutting
• 220~240VAC, 50/60HZ
• Duty Cycle: 60% at 50 amps and 100% at 35 amps
• Rated Input Current: 27 amps
• 3" Per minute @ 1" Steel (Severance Cut)
• 7" Per minute @ 3/4" Thick Steel
• 17" Per minute @ 1/2" Thick Steel
• Air Pressure Required: 60~70 psi @ 3.6 CFM

Tig Welding:
• Output Current: 15-200 Amps
• Power Usage 17 Amps @ 220VAC
• No Load Voltage: 62V
• Can Weld: Steel, Stainless, Moly, Ferrous
• Duty Cycle: 60% @ 200 Amps 100% @ 105 Amps
• High Frequency Start / HF Welding
• Working Voltage: 16.9V
• Gas Flow: 2-5L/min (using Argon supply)
• Footpedal fully adaptive. (Footpedal NOT included in the package)


Arc/Stick/MMA Welding:
• Output Current: 15-200 Amps
• Power Usage 23 Amps @ 220VAC
• No Load Voltage: 62V
• Can Weld: Steel, Stainless, Moly, Ferrous
• Duty Cycle: 60% @ 200 Amps 100% @ 95 Amps
• High Frequency Start / HF Welding
• Working Voltage: 25 Volts
• New Feature Added: Aluminum Welding for Stick Welding ONLY (patent pending)

PRICE: $729.00 *

  In Stock 

All items are shipped from the main warehouse in California.  Buyer is responsible to pay applicable taxes,  brokerage and customs fees.

XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX



250A AC Aluminum TIG ARC WELDER 60A PLASMA CUTTER 


Lotos IGBT LTPAC2500 is a FIVE-IN-ONE Digital Plasma Cutter (50A) / AC Tig Welder (250A) / DC Tig Welder (250A) / AC Stick (Or Arc) Pulse Welder (250A) / DC stick (or Arc) Welder (250A) . You would have to purchase 5 separate machines to do what this ONE machine can do! Using this heavy duty 50A plasma cutter is cheaper than Oxyacetylene after just a few cuts. Less cleaning, less maintenance, less noxious gases, less fire hazard, simply less overall work and a better, cleaner cut. The trigger of Lotos LP60 torch can be moved for a custom fit. A Guide is pre-installed on the torch head. It can be used in finger or thumb positions. Torch head is low profile for tight spaces. High Frequency IGBT DC Plasma cuts thicker materials than standard DC plasma cutters. High Frequency Plasma cuts faster with less distortion in the work piece. The cutting time of consumables is much longer than any other torch on market.

It's packed with full features like the separate machines. Both the AC and DC Tig welds from this LTPAC2500 are clean and strong for both Aluminum and Stainless Steels. This Tig welder is easier to use than any other Tig welder on the planet! Just flip a switch, set your amperage and weld...It's that simple. The footpedal comes with the LTPAC2500, you can dynamically control welding heat by this heavy duty footpedal. This machine will weld ANY kind of metal, including ALUMINUM, Steel, Stainless Steel, Moly, Ferrous etc.

An ARC welder with PULSE feature is a necessity in any industrial shop or home workshop. There are welding jobs that simply require ARC or SMAW (Shielded Metal Arc Welding). Stick welding is cheap and effective. Fill large gaps, holes, weld cast iron and weld extra thick steel with stick. With Arc welding, no shielding gas is required. In many ways stick arc welding is like MIG except there is no wire feed, you have to do that manually. ARC welding does not require any gas supply. With the LOTOS LTPAC2500, you can ARC weld any kind of Metal, including ALUMINUM, Steel, Stainless Steel, Moly, Ferrous etc.

Compared to other Plasma/Tig/Stick combo units on market, LTPAC2500 has following unique features:

IGBT Technology instead of Mosfet technology. IGBT is more reliable and robust for industrial usage. Google "IGBT vs. Mosfet", you will find out the answer. LTPAC2500 is the unique machine which can handle all kind of Metal cutting and Welding, including Cutting Aluminum (in DC mode), TIG welding Aluminum (in AC mode) and Stick Welding Aluminum (in AC mode with Pulse mode)
 

Plasma Cutting (PAC) Specs:

Duty Cycle: 60% at 60 amps and 100% at 45 amps. Rated Input Current: 31 amps Rated Recommended Cut: 7/8" @ 10-12 ipm (inch per minute) Rated Severance Cut: 1 1/8” @ 3 ipm (inch per minute) Air pressure required: 70~85 psi @ 3.6 cfm

Tig Welding (GTAW-P) Specs:

Output Current: 20-250 Amps Power Usage 20 Amps @ 220VAC No Load Voltage: 62V Can Weld: Aluminum, Steel, Stainless, Moly, Ferrous Duty Cycle: 60% @ 250 Amps 100% @ 135 Amps High Frequency Start / HF Welding Working Voltage: 16.9V AC balance control: 30% to 70% AC frequncy control: 20 to 100 Hz. Gas Flow: 2-5L/min (using 100% Pure Argon supply, argon regulator and hose included) Footpedal fully adaptive, you can set maximum current by the dial on pedal. (Footpedal included in the package)

(Note: for Aluminum AC tig welding, please use WT20,WZ08 or WP20 Tungsten electrodes. and set the Pulse Current to "Minimum", Set "AC Balance to 50% , AC Frequency to 60HZ and Post flow to 12s. Set "2T/4T" to "2T" or 0, "down slope" and "up slope" to 0. )       

Stick Welding Specs:

Output Current: 15-200 Amps Power Usage 28 Amps @ 220VAC No Load Voltage: 62V Can Weld: Aluminum, Steel, Stainless, Moly, Ferrous Duty Cycle: 60% @ 250 Amps 100% @ 125 Amps High Frequency Start / HF Welding Working Voltage: 30 Volts

Accessories Included In This Package:

 60A Heavy Duty Plasma cutting torch

Tig Welding Torch with 13 ft hose

Ground cable (9 ft) with clamp.

Total 16 pcs plasma cutting consumables (Extra 5 tips, 5 electrodes and 3 shield cups, 1 tip, 1 electrode and 1 cup are pre-installed on cutting torch)

Air filter and regulator with fitting accessories and a mounting bracket.

Air hoses

Argon regulator and filter (U.S. standard argon regulator with CGA580 connector)

Stick (ARC) Holder and Cable

Footpedal

1 Year warranty

PRICE: $1168.00 *  

   In Stock

All items are shipped from the main warehouse in California.  Buyer is responsible to pay applicable taxes,  brokerage and customs fees.

XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX




Make: LOTOS 
4th Version Design with longer cable torches and longer cable foot pedal.
Model: TIG200 AC/DC Tig Welder Plus AC/DC Arc Welder with FREE Welding Mask and FREE Foot pedal
(The cover of the machine is blue).
Type: 200A Tig Welder AC/DC & Arc Welder AC/DC 4in1 Unit.
Condition: BRAND NEW (In Sealed Factory Box)
Status: IN STOCK
Features:

• 200A AC Tig Welder
• 200A DC Tig Welder
• Automatic DUAL Voltage (110VAC/220VAC), DUAL Frequency ( 50Hz/60Hz )
• Brand new yet double function tested and performance tuned prior to shipping
• 1 Year Warranty on Parts and Labor from Lotos California or other Authorized Lotos Dealers/Repair Centers.
• Input Voltage: 110~220 VAC (Auto Detected-NO Switch is necessary)
•Square-wave inverter for accurate aluminum welding
• Both HF start hand torch control and precise foot pedal welding heat control.
• Housing Protection Grade: IP21
• Size: 28'' L x 13'' W x 17'' H
• Weight: 58 lbs
• Certification: CE, CCC, CSA and ISO-9001 certification
• ETL Approved
• Power factor: 0.93
• Power efficiency: 85%


Accessories: • Tig Welding Torch for AC and DC tig welding. The length of Tig welding cable is 10.3 ft.
• Tig Accessory Kit (check pictures)
• Gas Argon Regulator and hose.
• Welding Mask with brushing metal cleaning kits
• 220V Plug with 220V to 110V converter adapter pigtail.
• Stick (ARC) Holder and cable for AC/DC arc welding. The length of the Stick welding cable is 10.3 ft.
• Ground Clamp & Cable
• Footpedal with longer cable. (16.3 ft cable)
• User Manual and quick setup instruction.

ABOUT LOTOS
Since 2000 Lotos introduced Inverter Technology in welding and cutting machines. Lotos' latest high frequency inverter technology utilizes IGBT to deliver a far more constant, concentrated and precise current to the cutting surface. This technology has been substantially reduced in size and weight of Inverter Plasma Cutters and tig welders. It helps you to easily achieve smooth, clean cuts of wide range of surfaces and material (e.g. stainless steel, alloy steel, brass, aluminum and other conductive material) with minimal heat input and without distortion of metal. Lotos Plasma cutters are designed especially for businesses and DIY (do-it-yourself) users, while fully accommodating the demands of professional operators.
SPECS:

Tig / Arc / Stick / MMA Welding:


• Power Usage: 15 Amps @ 110VAC, 30 Amps @ 220 VAC Single Phase.
• Power Supply: 10-200 Amps AC/DC
• Welding Bead Quality: Excellent
• Can Weld ANY kind of metal: Aluminum, mild steel, stainless steel and other metals.
• Welding Capability 6 mm (1/4 inches)
• Welding Range: 30-200 Amp
• Duty Cycle: 45% @ 150 Amps
• Pre Gas Flow: 0.1-1 seconds.
• Post Gas Flow: 2 - 8 seconds.

SPECS:

Tig / Arc / Stick / MMA Welding:

• Power Usage: 15 Amps @ 110VAC, 30 Amps @ 220 VAC Single Phase.
• Power Supply: 10-200 Amps AC/DC
• Welding Bead Quality: Excellent
• Can Weld ANY kind of metal: Aluminum, mild steel, stainless steel and other metals.
• Welding Capability 6 mm (1/4 inches)
• Welding Range: 30-200 Amp
• Duty Cycle: 45% @ 150 Amps
• Pre Gas Flow: 0.1-1 seconds.
• Post Gas Flow: 2 - 8 seconds.

PRICE: $819.00 *   

   Sold Out

All items are shipped from the main warehouse in California.  Buyer is responsible to pay applicable taxes,  brokerage and customs fees.

XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX





Make: LOTOS
Model: MIG175 Mig Welder with FREE SPOOL GUN (The cover of the machine is blue).
Type: 175 A Mig Welder
Condition: BRAND NEW (In Sealed Factory Box)
Status: IN STOCK (Ships in 2 Business Days)
Features: • 175A Mig Welder
• 200 to 240VAC, DUAL Frequency ( 50Hz/60Hz )
• Brand new yet double function tested and performance tuned prior to shipping
• 1 Year Warranty
• Input Voltage: 210~240 VAC
• Input Power Frequency: 50 hz / 60 hz (Better performance under 60 hz)
• Insulation Grade: B
• Housing Protection Grade: IP21
• Size: 28'' L x 13'' W x 17'' H
• Weight: 70 lbs
• Certification: CE, CCC, CSA and ISO-9001 certification
• ETL Approved
• Power factor: 0.93
• Power efficiency: 85%


Accessories: • Mig Welding Torch (9')
• Spool Gun (10')
• Gas Argon Regulator
• Welding Mask
• Tape
• Wire (5')
• Ground Clamp & Cable (9')
• User Manual
Warranty: 3 Years (Parts and Labor) (Repair service available even after your warranty is expired, you only need to pay parts and labor, $25/hr, maximum 3 hours)

SPECS:

Mig Welding:
• Power Usage 22 Amps @ 220VAC
• Welding Bead Quality: Excellent
• Can Weld: Mild/Stainless Steel, Aluminum
• Welding Capability Steel: 18 Gauge- 1/4"
• Welding Capability Aluminum: 1/8” Plate or Thicker
• Welding Range: 30-175 Amp
• Duty Cycle: 30% @ 135 amps
• Wire Speed: 58-471 IPM

PRICE $629.00 *



All items are shipped from the main warehouse in California.  Buyer is responsible to pay applicable taxes,  brokerage and customs fees.

XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX




Lotos Technology is proud to present the WS 200. The WS 200 is a 200 Amp Tig welder and 155 Amp stick welder. This machine is designed to use 220V and Single Phase only

The Lotos WS 200 is packed with the full features of each of the separate machines. The Tig welds from this WS 200 are clean and strong. This Tig welder is easier to use than any other Tig welder on the planet! Just flip a switch, set your amperage and weld... It's that simple! This machine will weld steel, stainless steel, molybdenum, and ferrous alloys.

An ARC (Stick) welder is a necessity in any industrial shop or home workshop. There are welding jobs that simply require ARC or SMAW (Shielded Metal Arc Welding). With arc welding, no shielding gas is required. Stick welding is cheap and effective: fill the large gaps and holes, weld the cast iron and weld the extra thick steel with the stick. In many ways stick arc welding is like MIG except there is no wire feed, you have to do that manually.

This machine includes a Tig welding torch, a stick welding torch and ground cable. Argon regulators are sold separately and will be needed before you can use the machine.The machine is also footpedal ready (footpedal sold separately)

Capable of welding aluminum with DC ARC Welding Rods

Technical Details for WS-200:
Power supply voltage: AC 220 + 15% V / 50~60 Hz
Power supply capacity: 5.5 kVA
Duty cycle: 60%
Rated output current (ARC): 155 Amps
Rated output current (TIG): 200 Amps
No-load voltage: 43 V
Output current range (ARC): 5-155 Amps
Output current range (TIG): 5-200 Amps
Post-flow time: 0.5-15 s
Cosq (n): 0.93
Protection grade: IP 21
Weight: 14 kg
Dimensions (mm): 480*274*386

PRICE $415.00 * SOLD OUT


All items are shipped from the main warehouse in California.  Buyer is responsible to pay applicable taxes,  brokerage and customs fees.

XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX